Table of Contents
Advertisement
Configuration using the WBM
7.3 The menu items of the WBM
Click the "Write" button to transfer the changed data to the transponder.
NOTICE
Reading/writing transponder data with an established connection to the controller
Note that, if a connection to the controller is established, the configuration of the readers is
performed via the controller. To enable transponder data to be read/written via the WBM,
the connected readers must have been initialized correctly via the S7 controller beforehand.
7.3.10
The "User management" menu item
In the "User management" menu item, you can enable/disable authentication, create, delete
and edit user profiles and change passwords.
This page is divided into the following areas:
• User profiles
• User properties
• Password
• Roles
• Auto logout
• Authentication
Figure 7-14
The "User management" menu item
User profiles
The "User profiles" area contains a list of all existing user profiles. Up to a maximum of 30
user profiles can be created. To edit a user profile, select the required user name in the list.
The selected user name is highlighted in color.
94
Operating Instructions, 03/2022, C79000-G8976-C578-02
SIMATIC RF166C
Advertisement
Table of Contents
