Error Messages On The Touch Panel; Examples Of The Messages; Service Call - Riso ComColor FT Series Troubleshooting Manual

Error Messages on the Touch Panel

A description of the problem and instructions for resolving the problem are displayed, as shown in the
illustration below.
• An alphanumeric error code is displayed at the top of the error message screen.
Be sure to mention this error code when contacting your service representative.
- The first letter of the error code indicates the type of problem.
- The numbers vary depending on the location of the problem.

Examples of the Messages

The following are examples of messages. Follow the instructions in the displayed messages to resolve the
problems.
^ ^
• [Cancel] and [Continue] may be displayed on some message screens. Touch [Cancel] to stop the current
operation. Touch [Continue] to resume the current operation.
^ ^
<S000-0000>Service Call
This error message is displayed when inspection or repair is required by a service representative.
Message
Not enough space in memory.
Turn the power off and on again
with the power key on the
operation panel.
10
The machine cannot be used because there is not enough available
space on the internal hard disk.
Press the [Power] key on the operation panel to restart the machine.
If this does not solve the problem, contact your dealer or authorized
service representative. Be sure to mention the error code displayed
on the touch panel when contacting your dealer or authorized service
representative.
Action to Take
ComColor FT Series Troubleshooting Guide