7
Introduction to the Quaternary Pump
Firmware Updates
Firmware updates can be done using your user interface:
• handheld control module with files from a PC-card or
• Agilent ChemStation with files from floppy disk
The file naming conventions are:
xxxx-vvv.DLB, where
xxxx is the product number, e.g. 1311 for the G1311A Quaternary Pump and
vvv is the revision number, for example 200 is revision 2.00.
For instructions refer to your user interface.
Update of main system can be done in the resident system only.
N O T E
Update of the resident system can be done in the main system only.
Figure 50
220
Resident System
Firmware Update Mechanism
main FW update
resident FW update
Main System
1200 Series QP Reference Manual