7 Ensure clips are seated correctly and, move the lever back.
Lever
9 Replace the leak funnel with the waste tube. Locate the
lower end of the waste tube in the holder of the leak pan
and clip tube to the holder at the gradient valve cover.
Waste tube holder
1200 Series QP Reference Manual
8 Place the quaternary pump back to its position in the
stack, place vacuum degasser and solvent cabinet back in
place and re-connect all tubes and capillaries.
10 Replace the front covers and reconnect the power cable to
pump and on-line degasser and switch the modules on.
Leak funnel
Repairing the Pump
159
4