Agilent Technologies 1200 Series Reference Manual page 141

7 Place the Z-panel into position and fix it with the two
screws.
9 Clip the valve cover into its position and connect the
tubings back to the valve
ports.
1200 Series QP Reference Manual
8 Reconnect the two damper capillaries.
Screws
Z-panel
10 Replace the top foam section, optional interface board (if
installed), metal cover and top cover (see
Top Cover and Foam"
stack, reconnect all tubings and cables.
Repairing the Pump
Reconnect
"Replacing the
on page 157). Replace the pump on
4
141