Cisco NCS 1004 Command Reference Manual page 66

pm
Parameter
fcs-err
ifIn-Octets
ifIn-errors
in-good-bytes
in-good-pkts
long-frame
out-good-bytes
out-good-pkts
1024-1518-octets
128-255-octets
256-511-octets
512-1023-octets
64-octets
65-127-octets
The following table describes the FEC PM parameters.
Parameter
ec-words
uc-words
The following table describes the PCS PM parameters.
Command Reference for Cisco NCS 1004
60
Description
A count of frames received on a particular interface that are an integral number
of octets in length but do not pass the FCS check.
Total number of octets received on the interface, including framing characters.
Number of inbound packets that contained errors preventing them from being
delivered to a higher-layer protocol.
Total number of good bytes or octets received.
Total number of good packets received.
A count of frames received on a particular interface that exceed the maximum
permitted frame size.
Total number of good bytes or octets transmitted
Total number of good packets transmitted.
Total number of packets (including error packets) received that were between
1024 and 1518 octets in length inclusive (excluding framing bits but including
FCS octets).
Total number of packets (including error packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including
FCS octets).
Total number of packets (including error packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits but including
FCS octets).
Total number of packets (including error packets) received that were between
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
Total number of packets (including bad packets) received that were 64 octets
in length (excluding framing bits but including FCS octets).
Total number of packets (including error packets) received that were between
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
Description
Number of bit errors that are corrected by the system
Number of words that are not corrected by the system
Commands