Lmp - Cisco NCS 1004 Command Reference Manual

lmp

lmp
To enable functionality for GMPLS UNI LMP and enter LMP configuration commands, use the lmp command
in global configuration mode.
lmp
Syntax Description
This command has no keywords or arguments.
None
Command Default
Global configuration
Command Modes
Command History
Release
Release
7.0.1
Example
The following example shows how to enable LMP functionality and enter the sub-mode for LMP
configuration commands.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#lmp
RP/0/RP0/CPU0:ios(config-lmp)#
Command Reference for Cisco NCS 1004
48
Modification
This command is
introduced.
Commands