Cisco NCS 1004 Command Reference Manual page 64

pm
Parameter
pn
rx-sig-pow
sopmd
The following table describes the OTN PM parameters.
Parameter
ES-NE
ESR-NE
SES-NE
SESR-NE
UAS-NE
BBE-NE
BBER-NE
FC-NE
ES-FE
ESR-FE
SES-FE
SESR-FE
UAS-FE
BBE-FE
BBER-FE
FC-FE
The following table describes the Ethernet PM parameters.
Parameter
rx-util
tx-util
rx-pkt
stat-pkt
Command Reference for Cisco NCS 1004
58
Description
Phase Noise TCA reporting status or threshold
rx signal power TCA reporting status or threshold
Second Order Polarization Mode Dispersion TCA reporting status or threshold
Description
Error seconds in the near end
Error seconds ratio in the near end
Severely error seconds in the near end
Severely error seconds ratio in the near end
Unavailable seconds in the near end
Background block errors in the near end
Background block errors ratio in the near end
Failure counts in the near end
Error seconds in the far end
Error seconds ratio in the far end
Severely error seconds in the far end
Severely error seconds ratio in the far end
Unavailable seconds in the far end
Background block errors in the far end
Background block errors ratio in the far end
Failure counts in the far end
Description
Bandwidth utilization of port at the ingress side in percentage.
Bandwidth utilization of port at egress side in percentage.
Number of received packets
Status of received packets
Commands