Otnsec Policy - Cisco NCS 1004 Command Reference Manual

otnsec policy

otnsec policy
To configure an OTNSec policy, use the otnsec policy command in the configuration mode.
otnsec policy policy-name
Syntax Description
policy-name
None
Command Default
Configuration
Command Modes
Command History
Release
Release
7.0.1
Example
The following is a sample in which an OTNSec policy is configured.
RP/0/RP0/CPU0:ios#configure
Mon Mar 11 15:16:58.417 UTC
RP/0/RP0/CPU0:ios(config)#otnsec policy otnsec-policy1
RP/0/RP0/CPU0:ios(config-otnsec-policy)#cipher-suite AES-GCM-256
RP/0/RP0/CPU0:ios(config-otnsec-policy)#security-policy must-secure
RP/0/RP0/CPU0:ios(config-otnsec-policy)#sak-rekey-interval 120
RP/0/RP0/CPU0:ios(config-otnsec-policy)#commit
The following is a sample of an OTNSec policy.
RP/0/RP0/CPU0:ios#show run otnsec policy otnsec-policy1
Tue Mar 12 11:14:03.591 UTC
otnsec policy otnsec-policy1
cipher-suite AES-GCM-256
security-policy must-secure
sak-rekey-interval 120
!
Command Reference for Cisco NCS 1004
54
Policy
name
Modification
This command is
introduced.
Commands