Show Led - Cisco NCS 1004 Command Reference Manual

Commands

show led

To display the status of various LEDs present in NCS 1004, use the show led command in administration
EXEC mode.
show led [ location location ]
Syntax Description
location location
The status of all the LEDs present in NCS 1004 is displayed.
Command Default
Administration EXEC
Command Modes
Command History
Release
Release
7.0.1
Enter the show LED command in administration EXEC mode to display the status of all the LEDs present
Usage Guidelines
in NCS 1004.
Example
The following example shows sample output from the show led command.
sysadmin-vm:0_RP0# show led
Wed Mar
=============================================================
Location
=============================================================
0/0
0/1
0/2
0/3
0/RP0
0/FT0
0/FT1
0/FT2
0/PM0
0/PM1
(Optional) Displays LED information for a specific location.
Modification
This command was introduced.
20 04:45:25.457 UTC+00:00
LED Name
0/0-Status LED
0/1-Status LED
0/2-Status LED
0/3-Status LED
0/RP0-Attention LED
0/RP0-SYS LED
0/RP0-PSU LED
0/RP0-FAN LED
0/FT0-Status LED
0/FT1-Status LED
0/FT2-Status LED
0/PM0-Status LED
0/PM1-Status LED
Mode Color
WORKING GREEN
WORKING GREEN
WORKING GREEN
WORKING GREEN
WORKING OFF
WORKING AMBER
WORKING RED
WORKING GREEN
WORKING GREEN
WORKING GREEN
WORKING GREEN
WORKING AMBER
WORKING GREEN
Command Reference for Cisco NCS 1004
show led
97