Cisco NCS 1004 Command Reference Manual page 91

Commands
0/PM0
0/PM1
The following example shows sample output from the show environment command with the
temperatures keyword.
sysadmin-vm:0_RP0# show environment temperatures location 0/RP0
Wed Mar
================================================================================
Location
--------------------------------------------------------------------------------
0/RP0
The following example shows sample output from the show environment command with the power
keyword.
sysadmin-vm:0_RP0# show environment power
Wed Mar
================================================================================
CHASSIS LEVEL POWER INFO: 0
================================================================================
Total output power capacity (N + 1)
Total output power required
Total power input
Total power output
Power Group 0:
================================================================================
Power
Module
================================================================================
0/PM0
Total of Power Group 0:
Power Group 1:
================================================================================
Power
Module
================================================================================
0/PM1
Total of Power Group 1:
================================================================================
Location
================================================================================
0/0
0/1
0/2
0/3
0/RP0
0/FT0
NCS1K4-AC-PSU 24800
NCS1K4-AC-PSU 14240
20 04:40:48.518 UTC+00:00
TEMPERATURE
Sensor
TEMP_LOCAL
TEMP_REMOTE1
TEMP_CPU_DIE
20 04:41:39.990 UTC+00:00
Supply ------Input----
Type Volts
2kW-AC 0.0
Supply ------Input----
Type Volts
2kW-AC 228.8
1075W/
Card Type
NCS1K4-1.2T-K9
NCS1K4-1.2T-K9
NCS1K4-1.2T-K9
NCS1K4-1.2T-K9
NCS1K4-CNTLR-K9
NCS1K4-FAN
23680
14176
Value Crit Major Minor Minor Major
(deg C) (Lo) (Lo)
29 -10 -5
30 -10 -5
30 -10 -5
: 2000W +
: 1430W
: 1075W
: 1009W
------Output---
Amps Volts Amps
0.0 0.0 0.0
0W/ 0.0A 0W/ 0.0A
------Output---
Amps Volts Amps
4.7 12.1 83.4
4.7A 1009W/ 83.4A
Power Power
Allocated Used
Watts Watts
260 -
260 -
260 -
260 -
55 -
100 -
Command Reference for Cisco NCS 1004
show environment
Crit
(Lo) (Hi) (Hi) (Hi)
0 55 65 70
0 55 65 70
0 75 80 90
0W
Status
FAILED or NO PWR
Status
OK
Status
ON
ON
ON
ON
ON
ON
85