Ipcc Routed - Cisco NCS 1004 Command Reference Manual

Commands

ipcc routed

To specify the LMP neighbor IPCC configuration for GMPLS UNI, use the ipcc routed command in the
neighbor sub-mode for LMP GMPLS-UNI controller configuration mode.
ipcc routed
Syntax Description
This command has no keywords or arguments.
None
Command Default
LMP GMPLS-UNI controller neighbor configuration
Command Modes
Command History
Release
Release
7.0.1
The LMP submode enables GMPLS-UNI LMP functionality and acts as a container for other GMPLS-UNI
Usage Guidelines
LMP configuration commands.
Example
The following example shows how to specify the IPCC configuration for the GMPLS UNI controller
0/0/0/0, neighbor UN02.
RP/0/RP0/CPU0:ios(config)#lmp
RP/0/RP0/CPU0:ios(config-lmp)#gmpls optical-uni
RP/0/RP0/CPU0:ios(config-lmp-gmpls-uni)#neighbor UN02
RP/0/RP0/CPU0:ios(config-lmp-gmpls-uni-nbr-UN02)#ipcc routed
RP/0/RP0/CPU0:ios(config-lmp-gmpls-uni-nbr-UN02)#
Modification
This command is
introduced.
Command Reference for Cisco NCS 1004
ipcc routed
39