Cisco NCS 1004 Command Reference Manual page 87

Commands
show access-lists ipv4
Example
In the following example, the contents of all IPv4 access lists are displayed:
RP/0/RP0/CPU0:ios# show access-lists ipv4
RP/0/RP0/CPU0:ios#show access-lists ipv4
Wed Jan 17 09:52:12.448 IST
ipv4 access-list IPV4_ICMP_DENY
10 deny icmp any any (8 matches)
20 permit ipv4 any any (106 matches)
ipv4 access-list IPV4_ROUTER_FWD_TELNET_TRAFFIC_DENY
10 deny tcp any any eq telnet (3 matches)
20 permit ipv4 any any (6 matches)
Command Reference for Cisco NCS 1004
81