Ikev2 Profile - Cisco NCS 1004 Command Reference Manual

ikev2 profile

ikev2 profile
To configure an IKEv2 profile, use the ikev2 profile command in configuration mode.
ikev2 profile profile-name
Syntax Description
profile-name
None
Command Default
Configuration
Command Modes
Command History
Release
Release
7.0.1
Example
The following is a sample in which an IKEv2 profile is configured.
RP/0/RP0/CPU0:ios#configure
Thu Mar
RP/0/RP0/CPU0:ios(config)#ikev2 profile profile1
RP/0/RP0/CPU0:ios(config-ikev2-profile-profile1)#match identity remote address 10.0.0.1
255.255.255.0
RP/0/RP0/CPU0:ios(config-ikev2-profile-profile1)#keyring kyr1
RP/0/RP0/CPU0:ios(config-ikev2-profile-profile1)#lifetime 120
RP/0/RP0/CPU0:ios(config-ikev2-profile-profile1)#commit
Thu Mar
RP/0/RP0/CPU0:ios(config-ikev2-profile-profile1)#exit
RP/0/RP0/CPU0:ios(config)#exit
RP/0/RP0/CPU0:ios#show ikev2 profile profile1
Thu Mar
Profile Name
===============================================================================
Keyring
Lifetime(Sec)
DPD Interval(Sec)
DPD Retry Interval(Sec)
Match ANY
Total Match remote peers
Addr/Prefix
Command Reference for Cisco NCS 1004
34
Name of the IKEv2
profile.
Modification
This command is
introduced.
7 20:00:36.490 UTC
7 20:15:03.401 UTC
7 20:15:25.776 UTC
: profile1
: kyr1
: 120
: 10
: 2
: NO
: 1
: 10.0.0.1/255.255.255.0
Commands