Cisco NCS 1004 Command Reference Manual page 67

Commands
Parameter
PCS-ES
PCS-SES
PCS-UAS
PCS-ES-FE
PCS-SES-FE
PCS-UAS-FE
Example
The following is a sample in which the performance monitoring parameters of optics controller is
configured in 24 hour intervals.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#controller optics 0/0/1/1 pm 24-hour optics threshold osnr max
345
RP/0/RP0/CPU0:ios(config)#commit
The following is a sample in which the performance monitoring parameters of the ethernet controller
is configured in 15 minute intervals.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#controller HundredGigECtrlr 0/3/0/2 pm 15-min pcs report bip
enable
RP/0/RP0/CPU0:ios(config)#commit
The following is a sample in which performance monitoring parameters of Coherent DSP controller
is configured in 30 second intervals.
RP/0/RP0/CPU0:ios#configure
RP/0/RP0/CPU0:ios(config)#controller coherentDSP 0/0/1/1 pm 30-sec fec threshold post-fec-ber
max OE-15
RP/0/RP0/CPU0:ios(config)#commit
Description
Error seconds
Severly error seconds
Unavailable seconds
Error seconds in far end
Severly error seconds in far end
Unavailable seconds in far end
Command Reference for Cisco NCS 1004
pm
61