Mio Run/Fail Led States - Cisco ASR 5500 Installation Manual

MIO Run/Fail LED States

Figure 2: MIO Card Status LEDs
The possible states for all MIO/UMIO/MIO2 LEDs are described in the sections that follow.
MIO Run/Fail LED States
The MIO/UMIO/MIO2 Run/Fail LED indicates the overall status of the card. This LED should be steady
green for normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the
troubleshooting information in the table to diagnose the problem.
Table 2: MIO Run/Fail LED States
Color
Green
Blinking Green
Red
Troubleshooting
4
Description
Card powered with no errors detected
Card is initializing and/or loading software
Card powered with error(s) detected
Troubleshooting
Troubleshooting
None needed.
This is normal operation during boot-up.
Errors were detected during the Power On
Self Tests (POSTs). It is likely that the
errors were logged to the system's
command line interface during boot.