Sd Memory Card Removal Procedure - Keysight X Series Security Features And Document Of Volatility

8

SD Memory Card Removal Procedure

The SD Memory Card is present only in instruments with the PC6 and PC7
processor assemblies. See
details.
When present, the SD Memory Card is located on the A4 Processor assembly.
However, it can only be accessed after the instrument's disk drive is removed.
To remove the SD Memory Card:
1. Remove the disk drive by following the
2. Push in on the SD Memory Card and release. The Card springs back out, and can then
Once the disk drive has been removed, the SD Memory Card is accessible.
be removed. Figure 8-1 on page 58
Disk Drive Assembly and SD Memory Card extracted from the instrument.
Security Features and Document of Volatility
SD Memory Card Removal Procedure
"Determining Installed Options" on page 13
"Disk Drive Removal Procedure" on page
below shows the instrument rear panel, with the
for
52.
57