Configuring Usb For Read-Only - Keysight X Series Security Features And Document Of Volatility

User and Remote Interface Security Measures
USB Interfaces
6. From the Registry Editor menu, select File > Exit to save the settings and exit the
7. Shut down and restart the instrument, to enable the new settings to take effect.
Microsoft AutoRun Patch
N O T E
The information in this section applies only to Windows XP. If your instrument
has a Windows 7 operating system, you do not require this patch.
There is a defect in Windows XP that compromises the ability to disable
AutoRun. This defect has been fixed by a patch from Microsoft, as described in
the
This patch has been included in new instrument shipments from the factory
since revision A.03.00.
After the patch has been applied, there will be a Registry entry at:
HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\H
onorAutorunSetting
More Information
The following Wikipedia articles provide more information about AutoRun and
AutoPlay:
http://en.wikipedia.org/wiki/AutoRun
http://en.wikipedia.org/wiki/AutoPlay

Configuring USB for Read-only

As from instrument software revision A.04.00, a convenient mechanism is
provided to set the instrument's USB interfaces to read-only, thus preventing
transfer of files from the instrument onto USB devices.
You can change this setting only when you are logged on as the Administrator.
For details of how to log on to the instrument as the Administrator, see the
Keysight X-Series Signal Analyzer: Getting Started
setting, do the following:
1. If you are not currently logged on to the instrument as the Administrator, you must log
2. To log off, use one of the following procedures, depending on your instrument's
Security Features & Document of Volatility
editor.
Microsoft Knowledge Base Article ID:
with a default value of 1.
off.
If you are currently logged on to the instrument as the Administrator, and the Keysight
XSA application is already running, go to Step 4.
The log-off procedure executes more quickly if you first exit the Keysight XSA
application, but you can also log off without exiting the application.
operating system:
967715.
Guide. To change the
64