Products Covered by this Document
Determining Instrument Configuration based on Product Name
Figure 2-2
Rear Panel of Instrument with
Disk
Determining Installed Options
Use the following procedure to determine whether your instrument has a
magnetic or solid-state disk drive, and whether any of Options PC2 through
PC7 are installed.
1. Using the instrument front panel and softkey menus, press System > Show >
2. The
Security Features & Document of Volatility
System.
display appears. Look for start of the
Show System
below the top of the table, as shown in
Removable Magnetic
or
Figure 2-3
below.
Removable Solid-State
listing, a few lines
Option
13