Table of Contents
Advertisement
ActiveScale™ P100 Support Guide
h. Repeat the previous steps to attach the other rail to the rack.
2. Replace the System Node. For more information, refer to
3.4.3 Replacing Storage Node 1U mounting kits
Table 3-22. Storage Node 1U mounting kit replacement overview
Required Tools
None
3.4.3.1 Removing a Storage Node 1U mounting kit
To remove a Storage Node 1U mounting kit, do the following:
1. Remove the Storage Node from the rails. For more information, refer to
on page 44.
2. From the rear of the rack, press the tab marked PUSH located on the inside of the 1U rail.
3. Free the mounting kit rail from the rack vertical rail.
4. Move to the front of the rack and grasp the 1U mounting kit rail.
5. Press the front tab marked PUSH to release the mounting kit rail.
Caution: Make sure to hold the 1U bracket firmly and do not let go until it has
completely cleared the rack. There is a danger of dropping the bracket and losing
it in the interior of the rack, causing damage to the system, oneself, or others.
6. Complete the previous steps to remove the second 1U rail.
3.4.3.2 Installing a Storage Node 1U mounting kit
To install the replacement Storage Node 1U mounting kit, do the following:
Personnel Required
2
61
Installing a System Node
Replacement Time
3-4 hours
Removing a Storage Node
on page 115.
Advertisement
Table of Contents
