Figure 6-7. Scale Out: Summary Of Scan - Western Digital ActiveScale P100 Support Manual

ActiveScale™ P100 Support Guide

Figure 6-7. Scale out: Summary of scan

2. For each site, validate the network settings in each tab against your settings as specified in your
ActiveScale P100 ActiveScale X100 Site Survey, and/or change the Storage Network settings.
Tip: You can change the 4th octet of the new system's Public Network IP
addresses and you can change Storage Network addresses. System Network
addresses are carried forward from the existing system(s), so you cannot change
them.
3. Click Next to review each tab.
Important: On multi-site deployments, the wizard presents two levels of tabs. It
is critical that you review all the tabs. In other words, you must review Site 1's
network settings in each tab, Site 2's network settings in each tab, and Site 3's
network settings in each tab.
4. When you reach the last tab, click Proceed.
98