Replacing Storage Nodes; Removing A Storage Node; Table 3-19. Storage Node Replacement Overview; Figure 3-38. Psu Failure (Left) And Online Psu (Right) Icons - Western Digital ActiveScale P100 Support Manual

ActiveScale™ P100 Support Guide
3. Reconnect the AC power cords.
4. Using ActiveScale SM, verify that the PSU is functional.
a. In the ActiveScale SM Dashboard, click the Resources tab.
b. In the system image on the Resources page, click the node with the degraded PSU. The node will
have an alert icon. The node's status page will appear.
c. Check that all of the PSU Icons listed under the PSU section do not have alert notifications.

Figure 3-38. PSU failure (left) and online PSU (right) icons

3.3.4 Replacing Storage Nodes

Caution: The Storage Node weighs 87 lbs (39.46 kg). Two people are required
to move it.

Table 3-19. Storage Node replacement overview

Required tools
None

3.3.4.1 Removing a Storage Node

To remove a Storage Node:
1. Shut down the node. If the node is already powered down (for example, because it has failed), skip
this step.
Important: Do not shut down a node unless all other nodes are healthy.
Figure 3-39. Resources > Rack > Node > Shutdown
Personnel required
2
53
Replacement time
60 to 75 minutes