Table of Contents
Advertisement
ActiveScale™ P100 Support Guide
1. Configure the System Interconnects for your chosen uplink mode.
Important: This is an irreversible procedure and must be done by Western
Digital support running the configuration wizard.
2. Connect transceivers to specific System Interconnect uplink ports depending on your chosen uplink
mode, and connect cables from these transceivers to your corresponding network, at each site.
Note: Connect transceivers to ports 52 and 50 on each System Interconnect, on
each system, at each site
– For uplink mode 1 (two individual 10G access ports (48,47) per System Interconnect):
•
Connect transceivers to ports 48 and 47 on each System Interconnect, on each system, at each
site.
•
(For ActiveScale P100 with Column 2): Connect transceivers to port 46 on each System
Interconnect, on each system, at each site.
•
(For ActiveScale P100 with Column 3): Connect transceivers to port 45 on each System
Interconnect, on each system, at each site.
– For uplink mode 2 (one 10G trunk port (48) per System Interconnect):
•
Connect transceivers to port 48 on each System Interconnect, on each system, at each site.
– For uplink mode 3 (one 40G trunk port (50) per System Interconnect):
•
Connect transceivers to port 50 on each System Interconnect, on each system, at each site.
– For uplink mode 4 (three 10G trunks ports (48,47,46) with LACP per System Interconnect):
•
Provide non-conflicting VLAN IDs and configure your respective switch ports for LACP.
•
Connect transceivers to ports 48, 47, and 46 on each System Interconnect, on each system, at
each site.
– For uplink mode 5 (two 40G trunks ports (52,50) with LACP per System Interconnect):
•
Provide non-conflicting VLAN IDs and configure your respective switch ports for LACP.
•
Connect transceivers to ports 52 and 50 on each System Interconnect, on each system, at each
site.
Table 6-3. System Interconnect uplink ports
System type
1 column
System Interconnect 1 (SW1)
System Interconnect 2 (SW2)
System Interconnect 1 (SW1)
System Interconnect 2 (SW2)
2 column
System Interconnect 1 (SW1)
System Interconnect 2 (SW2)
3 column
System Interconnect 1 (SW1)
System Interconnect 2 (SW2)
Local device
47
47
48
48
46
46
45
45
Local port
Site
_Column1_StorageNetwork1
N
Site
_Column1_StorageNetwork2
N
Site
_SystemNetwork1
N
Site
_SystemNetwork2
N
Site
_Column2_StorageNetwork1
N
Site
_Column2_StorageNetwork2
N
Site
_Column3_StorageNetwork1
N
Site
_Column3_StorageNetwork2
N
95
Your network
Advertisement
Table of Contents
