Figure 3-43. Rail Attaching To Rear Vertical Rail; Figure 3-44. Rail Attaching To Front Vertical Rail - Western Digital ActiveScale P100 Support Manual

ActiveScale™ P100 Support Guide

Figure 3-43. Rail attaching to rear vertical rail

e. Extend the outer rail forward and insert the pegs into the front vertical rail.

Figure 3-44. Rail attaching to front vertical rail

f. Extend the inner rail to its full length.
g. Remove the inner rail by sliding the white clip with a rounded edge forward.
Note: Be cautious leaving the outer rails extending out of the rack. Consider
pushing the outer rails back until you are ready to install the node.
60