Installing The 1U Rail Kit; Figure 7-1. System Expansion Node Rack Locations; Figure 7-2. Expand The Outer Rail - Western Digital ActiveScale P100 Support Manual

ActiveScale™ P100 Support Guide

Figure 7-1. System Expansion Node rack locations

7.4.1 Installing the 1U rail kit

To install the rails for the System Expansion Node:
1. Attach the outer rails to the rack.
Note: Verify that you are installing the correct rail on each side of the rack. The
rear of each rail is marked with "rear".
a. Extend the outer rail enough that it extends between the two vertical rails of the rack.

Figure 7-2. Expand the outer Rail

105