Before Installing The Drive - Western Digital WD Series Installation Manual

BEFORE INSTALLING THE DRIVE

NOTE: Record the hard drive's model number and serial
number before you begin the installation.
Be sure that you have the following items prior to
installing the WD Enterprise drive:
• Computer system manual
• Operating system manual
• Host bus adapter manual
• Non-magnetic screwdriver
You may also need:
• Jumper shunts, if you change the drive configuration.
Jumper shunts are available from your local computer
dealer or from Western Digital technical support.
• Interface cable (for 50-pin or 68-pin models)
• A drive tray or mounting rails, depending upon
system requirements
• Additional power cable(s)
$
Released 10/18/96