Install The Pressure Transducer - Raven SmarTrax Installation Manual

Chapter 3
Install the SmarTrax valve (P/N 334-0003-088) on the hydraulic valve mounting plate (P/N 107-0172-060)
7.
using four 5/16"-18 x 7/8" hex bolts (P/N 311-0052-104), four washers (P/N 313-2300-014) and four 5/16"
lock washers (P/N 313-1000-019).

Install the Pressure Transducer

Shield Covering the Steering Control Unit (SCU)
FIGURE 5.
Remove the hose shield covering the steering control unit on the left side of the machine.
1.
DR Port Hydraulic Fitting Assembly
FIGURE 6.
Install the -4 ORB M/F adjustable 90° elbow fitting (P/N 333-0012-337) on the -4 SAE O-ring (F) to female
2.
diagnostic coupler hydraulic fitting (P/N 333-0012-336).
Install the 0-3000 psi pressure transducer (P/N 422-0000-086) on the installed adjustable 90° elbow fitting.
3.
12 John Deere 8x00/8x10 Series SmarTrax™ Installation
Hose Shield