Chapter 3
Valve Mounting Plate Installed
FIGURE 4.
Install two 3/8"-16 UNC x 1-1/2" hex bolts (P/N 311-0054-107), four washers (P/N 313-2300-014), and two
4.
3/8"-16 nylon insert lock nuts (P/N 312-4000-061) in the mounting holes shown in the figure above.
Install the SmarTrax valve (P/N 334-0003-088) on the hydraulic valve mounting plate (P/N 107-0172-060)
5.
using four 5/16"-18 x 7/8" hex bolts (P/N 311-0052-104), four washers (P/N 313-2300-012) and four 5/16"
lock washers (P/N 313-1000-019).
Install the Pressure Transducer
Shield Covering the Steering Control Unit (SCU)
FIGURE 5.
Remove the hose shield covering the steering control unit on the left side of the machine.
1.
14
John Deere 8X00/8X10 Series SmarTrax™ Installation Manual
Installed 3/8"-16 UNC
x 1" Hex Bolts
(P/N 311-0054-107)
Hose Shield