C
3
HAPTER
INSTALL THE PRESSURE, EXCESS FLOW, AND TANK LINES
EQUIPMENT WITHOUT LOADER
1. Remove the hydraulic line between the machine pressure port and the machine excess flow port.
FIGURE 10. Machine Pressure Port and Machine Excess Flow Port
Pressure Port
Machine Excess
Flow Port
2. Connect the machine pressure port and the steering valve P port using the 214-1001-212 hose.
FIGURE 11. Machine Pressure Port and Steering Valve P Port
3. Connect the machine excess flow port and the steering valve EF port using the 214-1001-216 hose.
20
Machine
Machine
Pressure Port
TC1/HDU Installation Manual for Kubota M5 Series (Non-Steer Ready)
Machine
Pressure Port
Machine Excess
Flow Port
Steering Valve
P Port
Hydraulic
Line