1. Manuals
  2. Brands
  3. Raven Manuals
  4. Farm Equipment
  5. SmarTrax
  6. Installation manual

Raven SmarTrax Installation Manual

For ag-chem rogator 854 (1996 and earlier)
Hide thumbs Also See for SmarTrax:
Table of Contents

Advertisement

Quick Links

Download this manual
SmarTrax™ Installation Manual
Ag-Chem RoGator 854 (1996 and Earlier)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmarTrax and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Raven SmarTrax

Summary of Contents for Raven SmarTrax

  • Page 1 SmarTrax™ Installation Manual Ag-Chem RoGator 854 (1996 and Earlier)
  • Page 2 GPS satellites, the OmniSTAR correction service or the WAAS correction service. Raven Industries accepts no responsibility for the use of the signal for other than the stated purpose. Raven Industries shall not be responsible or liable for incidental or consequential damages or a loss of anticipated benefits or profits, work stoppage or loss or impairment of data arising out of the use, or inability to use, the SmarTrax or any of its components.

  • Page 3: Table Of Contents

    016-0190-025 TABLE OF CONTENTS 09/06 BASIC KIT CONTENTS ........................2 MOUNTING THE STEERING ASSIST MANIFOLD ................ 3 MOUNTING THE STEERING ASSIST MANIFOLD BRACKET ............3 MOUNTING THE LINEAR STEERING POSITION SENSOR (SPS) ..........4 CONNECTING P AND EF HOSES ....................5 CONNECTING THE SUPPLIED EF HOSE ..................

  • Page 4: Basic Kit Contents

    FTG., ADAPTER, SWIVEL RUN TEE, 3/4" JIC 333-0012-039 M/M/F FTG., ELBOW, 90° SWIVEL, 9/16" JIC M/F 333-0012-042 FTG., ELBOW, 90° SWIVEL, 3/4" JIC M/F 333-0012-064 MANUAL, INSTALLATION 016-0190-025 MANUAL, INSTALLATION, SMARTRAX 016-9001-008 LABEL, WARNING, DO NOT STEP 041-0159-688 LABEL, WARNING, TAMPERING 041-0159-689 CABLE, HYD., SOLENOID/OVERRIDE 115-0171-466...

  • Page 5: Mounting The Steering Assist Manifold

    MOUNTING THE STEERING ASSIST MANIFOLD Smartrax Valve Mount the Steering Assist Manifold to the bracket using the provided bolts and hole pattern. Be sure that the A, B, & T ports of the valve face forward when the bracket is in place on the machine.

  • Page 6: Mounting The Linear Steering Position Sensor (Sps)

    MOUNTING THE LINEAR STEERING POSITION SENSOR (SPS) Mount SPS to either the left or right steering cylinder on the machine using the supplied brackets. Remove the bolts holding the steering cylinder. Place bracket on mount and insert bolt through bracket and tighten as shown in pictures. Tighten SPS mounting screws in the outside hole in the mounting bracket.

  • Page 7: Connecting P And Ef Hoses

    CONNECTING “P” AND “EF” HOSES Locate the Steering Control Unit (SCU). This is under the cab of the sprayer. Locating the Sprayer SCU Disconnect the original “P” hose from the “P” port on the SCU. Disconnecting the original “P” hose from “P” port on the SCU...

  • Page 8: Connecting The Supplied Ef Hose

    Route the disconnected end of the original “P” hose back towards Steering Assist Manifold. Connect the original “P” hose to the “P” port on the Steering Assist Manifold. Connecting the original “P” hose to the “P” port on the Steering Assist Manifold CONNECTING THE SUPPLIED “EF”...

  • Page 9: Connecting Left And Right Hoses

    CONNECTING LEFT AND RIGHT HOSES Locate the original “L” and “R” hoses at the front of the tractor. Original “L” and “R” hoses Disconnect the original “L” and “R” hoses from the tractor’s left and right tee fittings as shown below.
  • Page 10 Reconnect the original “R” hose to the opposite end of the supplied right tee connector. Connect the supplied “R” hose (P/N 214-1000-100) to the branch end of the supplied right tee connector. Connect the supplied “L” hose (P/N 214-1000-096) to the branch end of the supplied left tee connector.
  • Page 11 Continue routing the supplied “L” and “R” hoses along the LHS of the chassis, towards the Steering Assist Manifold. Routing supplied “L” and “R” hoses towards the Steering Assist Manifold Connect the “L” hose to port “A” on the steering control valve. Connect the “R”...

  • Page 12: Connecting T Hoses

    CONNECTING T HOSES Locate the tractor tank. This is on the RHS of the tractor. Disconnect the original T hose from the tractor tank. Tank Connection Disconnecting the original T hose from the tractor tank Connect the run end of a supplied tee connector (3/4” JIC) to the tank. Reconnect the original T hose to the opposite run end of the tee connector.

  • Page 14: Start-Up Procedures

    START-UP PROCEDURES After installing the SmarTrax on your machine, always follow these start-up procedures. Make sure the Steering Position Sensor does not over-extend or over-compress when turning the wheels. Turn the wheels fully from side to side numerous times to remove air from the hydraulic system.
  • Page 15 How Can I Get Service? Bring the defective part and proof of purchase to your Raven Dealer. If your Dealer agrees with the warranty claim, the Dealer will send the part and proof of purchase to their distributor or to Raven Industries for final approval.
  • Page 16 P.O. Box 5107 Fax: 605-331-0426 Sioux Falls, SD 57117-5107 www.ravenprecision.com atdinfo@ravenind.com Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries, Inc. All rights reserved under copyright laws.

Table of Contents