Hydraulic Installation - Raven SmarTrax Installation Manual

CHAPTER
3
Important:
The machine must be equipped with the John Deere Power Beyond coupler kit before installation of
the SmarTrax kit is performed. If the machine is not equipped with this kit, contact your local John Deere
dealer for ordering and installation information before attempting to install SmarTrax. The SmarTrax
system WILL NOT WORK without the John Deere Power Beyond coupler kit.
Manual No. 016-4001-006
H ydraulic Installation
C h a p t e r 3
WARNING
Hydraulics are under pressure. Care should always
be taken with a system that has been pressurized.
Before beginning the SmarTrax hydraulic installation,
turn off the machine and relieve pressure by turning
the steering wheel left and right.
When disconnecting or purging hydraulic hoses, be
aware that the hydraulic fluid within the machine's
system may be extremely hot and under high
pressure.
Tampering with hydraulic valves may cause serious
injury or death, and will void the warranty.
CAUTION
When installing SmarTrax hydraulics or performing
diagnostics, maintenance, or routine service, ensure
precautions are taken to prevent any foreign material
from being introduced into the machine's hydraulic
system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly cause damage to the
SmarTrax hydraulic valve.
9