1. Manuals
  2. Brands
  3. Raven Manuals
  4. Farm Equipment
  5. SmarTrax
  6. Installation manual

Raven SmarTrax Installation Manual

Case ih spx 3320/3230/3330
Hide thumbs Also See for SmarTrax:
Table of Contents

Advertisement

Quick Links

Download this manual
SmarTrax™ Installation Manual
Case IH SPX 3320/3230/3330

Advertisement

Table of Contents
loading

Related Manuals for Raven SmarTrax

Summary of Contents for Raven SmarTrax

  • Page 1 SmarTrax™ Installation Manual Case IH SPX 3320/3230/3330...
  • Page 2 GPS, GNSS, SBAS, etc.). Therefore, Raven Industries cannot guarantee the accuracy, integrity, continuity, or availability of these services and cannot guarantee the ability to use Raven systems, or products used as components of systems, which rely upon the reception of these signals or availability of these services.

  • Page 3: Table Of Contents

    ......................4 Point of Reference ....................... 4 Kit Contents ..........................4 Chapter 3 Hydraulic System Installation..........9 Install Fittings on the SmarTrax Valve ..................10 Install Fittings on the Flow Switch ................... 10 Mount the SmarTrax Valve ...................... 11 Install the Pressure Hose ......................
  • Page 4 Table of Contents Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual...

  • Page 5: Important Safety Information

    Ensure SmarTrax is disabled prior to starting any maintenance work on SmarTrax or the machine. WARNING • When starting the machine for the first time after installing SmarTrax, be sure that all persons stand clear in case a hose has not been properly tightened. •...

  • Page 6: Hydraulic Safety

    CAUTION Hydraulic Safety • Raven Industries recommends that appropriate protective equipment be worn at all times when working on the hydraulic system. • Never attempt to open or work on a hydraulic system with the equipment running. Care should always be taken when opening a system that has been previously pressurized.

  • Page 7: Introduction

    CHAPTER C h a p t e r 2 Congratulations on your purchase of the SmarTrax system! This system is designed to provide cutting-edge, hands-free steering of the machine via Global Positioning System (GPS) coordinates. This manual applies to the following machines:...

  • Page 8: Preparing For Installation

    Do not remove plastic caps from a part until it is necessary for installation. Raven Industries recommends the following best practices when installing or operating the SmarTrax system for the first time, at the start of the season, or when moving the SmarTrax system to another machine: •...
  • Page 9 Introduction Case IH Patriot 3320/3230/3330 SmarTrax Installation Kit (P/N 117-5032-081) TABLE 1. Picture Item Description Part Number Qty. Valve - SmarTrax Hydraulic 334-0003-088 Switch - Flow 334-0003-085 Node - SmarTrax 3D CAN Control 063-0173-228 Bracket - Hydraulic Valve Mounting 107-0171-705...
  • Page 10 Chapter 2 Case IH Patriot 3320/3230/3330 SmarTrax Installation Kit (P/N 117-5032-081) TABLE 1. Picture Item Description Part Number Qty. Washer - 5/16” Split Lock 313-1000-019 Washer - 1/4” Flat 313-2300-009 Hydraulic Installation Kit (P/N 117-0199-081) TABLE 2. Picture Item Description Part Number Qty.
  • Page 11 Node Mounting Kit (P/N 117-0197-078) TABLE 3. Picture Item Description Part Number Qty. Plate - SmarTrax Node Mounting 107-0171-924 Standoff - M6 x 40mm M/F x 13 mm Hex 305-8000-008 Bolt - 1/4”-20 x 7/8: Flat Head 311-0002-308 Nut - 1/4”-20 UNC Nylon Insert Lock 312-4000-057 Washer - .312 ID x .734 OD x .065 Thick...
  • Page 12 Chapter 2 Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual...

  • Page 13: Hydraulic System Installation

    WARNING Hydraulics are under pressure. Care should always be taken with a system that has been pressurized. Before beginning the SmarTrax hydraulic installation, turn off the machine and relieve pressure by turning the steering wheel left and right. When disconnecting or purging hydraulic hoses, be aware that the hydraulic fluid within the machine’s system may be extremely hot...

  • Page 14: Install Fittings On The Smartrax Valve

    Chapter 3 Install Fittings on the SmarTrax Valve Before mounting the SmarTrax valve (P/N 334-0003-088) on the machine, install the proper fittings in the valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.

  • Page 15: Mount The Smartrax Valve

    Depending on the model of the machine, the transducer may need to be installed in Port A3 instead of Port A1 to avoid interference. Mount the SmarTrax Valve NOTICE The appearance of the SmarTrax hydraulic valve may vary slightly from the images contained in this manual. However, the fittings, hose connections, and cable connections remain the same.

  • Page 16: Install The Pressure Hose

    Chapter 3 Mount the SmarTrax valve (P/N 334-0003-088) to the hydraulic valve mounting bracket (P/N 107-0171-705) using four 5/16” hex bolts (P/N 311-0052-104) and four 5/16” lock washers (P/N 313-1000-019). Mount the flow switch (P/N 334-0003-085) to the valve mounting bracket using two 1/4”-20 x 2” screws (P/N 311-0050-109), two 1/4”...

  • Page 17: Install The Tank Hose

    Install the 90° end of the supplied hydraulic hose (P/N 214-1000-318) on the 90° end of the installed tee fitting. Connect the straight end of the installed hydraulic hose to Port P of the SmarTrax valve. Install the Tank Hose Locate the machine’s steel tank line.
  • Page 18 Install the 90° end of the supplied hydraulic hose (P/N 214-1000-671) on the 90° end of the installed tee fitting. Connect the straight end of the installed hydraulic hose to Port B of the SmarTrax valve (P/N 334-0003- 088). Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual...

  • Page 19: Hydraulic System Diagram

    Hydraulic System Installation Hydraulic System Diagram Manual No. 016-4001-081...
  • Page 20 Chapter 3 Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual...

  • Page 21: Cab Component Installation

    When choosing the location for the SmarTrax node, consider the following points: • The node is not weatherproof. Mount the SmarTrax node inside the machine’s cab on a flat, level surface. • One of the six numbered direction arrows on the node must be oriented in the direction of forward vehicle travel, one arrow pointing straight up, and two of the arrows parallel to the ground.

  • Page 22: Mount The Smartrax Node

    Node Mounted to the Mounting Plate FIGURE 2. Mount the SmarTrax node (P/N 063-0173-228) to the node mounting plate (P/N 107-0171-924) using three 1/4”-20 x 7/8” flat head bolts (P/N 311-0002-308), three washers (P/N 313-2300-011), and three 1/4”-20 UNC nylon insert lock nuts (P/N 312-4000-057).

  • Page 23: Install The Node Cable

    Cab Component Installation Node Installed FIGURE 4. Mount the node mounting plate on the installed standoffs and secure with the machine’s existing nuts that were previously removed. Install the Node Cable Node Cable Installed on Node FIGURE 5. Install the two large, rectangular connectors of the node cable (P/N 115-4001-110) into the correct ports of the node, tightening the bolts on the harness connectors to secure the connections.
  • Page 24 Connect the DGPS connector to the GPS receiver. DGPS OUT Connector Routed Under Operator’s Seat FIGURE 7. Route the DGPS OUT connector out the right corner of the operator’s seat base and under the right arm rest. Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual...

  • Page 25: Install The Valve Cable

    Cab Component Installation DGPS OUT Connected to Console Receiver Connection FIGURE 8. Console Console Receiver Cable Connection DGPS Out (Node Cable Connection) Connect the DGPS OUT connector to the Viper Pro or Envizio Pro receiver connection. Install the Valve Cable Valve Cable Routed Through Access Point FIGURE 9.

  • Page 26: Install The Foot Switch

    (P/N 334-0003-085). Note: These connections can be plugged into either transducer. Plug the VALVE connector from the valve cable into the open port at the end of the SmarTrax valve (P/N 334-0003-088). Install the Foot Switch Foot Switch Installed FIGURE 11.

  • Page 27: System Diagrams

    Cab Component Installation System Diagrams Node Wiring Diagram Manual No. 016-4001-081...
  • Page 28 Chapter 4 Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual...
  • Page 29 Cab Component Installation Manual No. 016-4001-081...
  • Page 30 Chapter 4 Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual...

  • Page 31: Startup Procedures

    Remove Air from the Hydraulic System During the SmarTrax system installation, whenever the hydraulic system is purged for maintenance, or when fittings are loosened or disconnected, air is introduced into the lines of the hydraulic system. To remove air from the hydraulic system and to ensure proper operation of the SmarTrax system: Turn the machine’s wheels fully from side to side repeatedly.

  • Page 32: Verify The Hydraulic System Installation

    • Hydraulic fluid is not leaking from the system. Note: If there are issues with the SmarTrax system, turn off the machine and correct them immediately. For additional assistance, contact your local Raven dealer. Calibrate the SmarTrax System Refer to the SmarTrax & SmartSteer Calibration and Operation Manual (P/N 016-0171-277) for instructions on calibrating the SmarTrax system, adjusting system settings, and system operation.
  • Page 33 System Diagrams 23 Hydraulic System Installation Hydraulic System Diagram 15 Installing Fittings on the Flow Switch 10 Installing Fittings on the SmarTrax Valve 10 Installing the Left and Right Steering Hoses 13 Installing the Pressure Hose 12 Installing the Tank Hose 13...
  • Page 34 Index Case IH SPX 3320/3230/3330 SmarTrax™ Installation Manual...
  • Page 35 How Can I Get Service? Bring the defective part and proof of purchase to your Raven dealer. If your dealer agrees with the warranty claim, the dealer will send the part and proof of purchase to their distributor or to Raven Industries for final approval.
  • Page 36 P.O. Box 5107 Fax: 605-331-0426 Sioux Falls, SD 57117-5107 www.ravenprecision.com www.ravenhelp.com Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries, Inc. All rights reserved under copyright laws.

Table of Contents