Raven SmarTrax Installation Manual page 28

Chapter 5
WAS Harness Connection
FIGURE 5.
Connect the WAS harness connection to the connector on the installed WAS.
5.
Pressure Transducer Harness Connection
FIGURE 6.
TRANSDUCER
Connection
Connect the TRANSDUCER connector to the open transducer port on the end of the machine's SCU.
6.
Valve Harness Connections
FIGURE 7.
VALVE
Connection
Connect the VALVE connector on the valve harness to the open 4-pin connector on top of the SmarTrax
7.
valve.
Route the cable away from moving parts and heat sources, securing with plastic cable ties as necessary.
8.
24 John Deere 8x00/8x10 Series SmarTrax™ Installation