Verify The Hydraulic System Installation - Raven SmarTrax Installation Manual

Chapter 6

Verify the Hydraulic System Installation

Turn on the machine.
1.
Double-check all fitting and hose connections to ensure that:
2.
•
Hoses are not rubbing on or interfering with moving parts.
•
Hydraulic fluid is not leaking from the system.
Note:
If there are issues with the SmarTrax system, turn off the machine and correct them immediately. For
additional assistance, contact your local Raven dealer.
Calibrate the SmarTrax System
Refer to the SmarTrax & SmartSteer Calibration and Operation Manual (P/N 016-0171-277) for instructions on
calibrating the SmarTrax system, adjusting system settings, and system operation.
30 John Deere 8x00/8x10 Series SmarTrax™ Installation