Install Fittings In The Smartrax Valve - Raven SmarTrax Installation Manual

Chapter 3

Install Fittings in the SmarTrax Valve

Before mounting the SmarTrax valve (P/N 334-0003-088) on the machine, install the proper fittings in the
valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure.
Fittings Installed in the SmarTrax Valve
FIGURE 1.
Fitting - -4 SAE O-Ring (M) Plug
Fitting - -4 ORFS (M) to -6 SAE O-Ring (M) Straight Adapter
Fitting - -6 ORFS (M) to -8 SAE O-Ring (M) Straight Adapter
Fitting - -6 ORFS (M) to -10 SAE O-Ring (M) Straight Adapter
Cartridge - -08 Ball Shuttle Hydraulic
Refer to the table and above to install the fittings in the appropriate ports of the SmarTrax valve.
1.
Remove the existing cartridge from Port EP of the SmarTrax valve and replace it with the -08 ball shuttle
2.
hydraulic cartridge (P/N 334-0002-109).
10
Fitting
John Deere 8x00/8x10 Series SmarTrax™ Installation
Part Number Port
333-0012-051 PS
LSPV,
333-0012-195
LS STEER
333-0012-199 P, T
333-0012-233 A, B
334-0002-109 EP1