CHAPTER
5
INSTALL THE SMARTRAX NODE
MOUNT THE SMARTRAX NODE
FIGURE 1. Node Mounting Plate and Support Bracket Installed
Machine's
Existing Screw
Node Support
Bracket
(P/N 107-0172-
Installed Bolt
(P/N 311-0050-
105)
1. Mount the node mounting bracket (P/N 107-0172-128) on the bar running along the front of the cab using two
3/4" W x 1-1/4" L x 1/4"-20 thread U-bolts (P/N 107-0172-102) and four 1/4"-20 flanged lock nuts (P/N 312-1001-
168).
2. Remove the existing screw to the right of the machine's dash.
3. Position the node support bracket (P/N 107-0172-105) over the hole and re-install the machine's screw.
4. Secure the other end of the node support bracket to the node mounting bracket using one 1/4"-20 UNC x 1"
hex bolt (P/N 311-0050-105) and one 1/4"-20 UNC flanged lock nut (P/N 312-1001-168).
Cab Component Installation: Install the SmarTrax Node
C AB COMPONENT
C H A P T E R 5
INSTALLATION
Node Mounting
Bracket
(P/N 107-0172-
128)
Installed U-Bolts
(P/N 107-0172-
102) and Nuts
(P/N 312-1001-
168)
31