C
3
HAPTER
MOUNT THE SMARTRAX VALVE
FIGURE 3. Mounting Plate Installed
1. Install the SmarTrax valve (P/N 334-0003-088) on the mounting bracket (P/N 107-0172-104) using four
5/16"-18 x 7/8" hex bolts (P/N 311-0052-104) and four 5/16" lock washers (P/N 313-1000-019).
FIGURE 4. Machine's Top Link Cradle Bracket
2. Remove the two bolts used to fasten the top link cradle bracket to the machine.
16AGCO DT-A Series, Massey Ferguson 84x0 Series, Challenger MT6x5B Series SmarTrax Installation Manual