Raven SmarTrax Installation Manual page 36

C 5
HAPTER
FIGURE 2. SmarTrax Node Installed
5. Install the two large, rectangular connectors of the node harness (P/N 115-4001-126) into the correct ports of
the SmarTrax node (P/N 063-0173-228).
6. Tighten the bolts on the harness connectors to secure the connections.
7. Mount the node to the node mounting bracket using three 3/8"-16 nylon insert thin lock nuts (P/N 312-4001-
109).
FIGURE 3. Access Panel Location
8. Route the node harness along the floor mat and under the access panel to the right of the operator's seat.
32AGCO DT-A Series, Massey Ferguson 84x0 Series, Challenger MT6x5B Series SmarTrax Installation Manual