C
3
HAPTER
FIGURE 14. Tee Fittings Installed in Pressure and Tank Ports
3. Install 18L, M26 x 1.5 swivel run tee adapter fittings (P/N 333-0012-357) in the open ports of the machine's
hydraulic valve.
4. Install the machine's caps removed in step 2 on the opposite ends of the installed tee fittings.
5. Install the 18L end of the supplied hydraulic hose (P/N 214-1000-860) on the 90° end of the tee fitting installed
in the machine's tank port.
6. Connect the other end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax valve (P/
N 334-0003-088).
7. Install the 18L end of the supplied hydraulic hose (P/N 214-1000-860) on the 90° end of the tee fitting installed
in the machine's pressure port.
8. Connect the other end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax valve.
22AGCO DT-A Series, Massey Ferguson 84x0 Series, Challenger MT6x5B Series SmarTrax Installation Manual