1. Manuals
  2. Brands
  3. Raven Manuals
  4. Farm Equipment
  5. SmarTrax
  6. Installation manual

Raven SmarTrax Installation Manual

Case ih patriot 2250, non-steer ready, my17 and newer
Hide thumbs Also See for SmarTrax:
Table of Contents

Advertisement

Quick Links

Download this manual
SmarTrax, Case IH Patriot 2250,
Non-Steer Ready, MY17 and
Newer Installation Manual
Manual No. 016-5032-037 Rev. A
12/16
E28539
Copyright 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmarTrax and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Raven SmarTrax

Summary of Contents for Raven SmarTrax

  • Page 1 SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual Manual No. 016-5032-037 Rev. A 12/16 E28539 Copyright 2016...
  • Page 2 GPS, GNSS, SBAS, etc.). Therefore, Raven Industries cannot guarantee the accuracy, integrity, continuity, or availability of these services and cannot guarantee the ability to use Raven systems, or products used as components of systems, which rely upon the reception of these signals or availability of these services.

  • Page 3: Table Of Contents

    ............................. 8 Kit Contents ..........................9 Chapter 3 Hydraulic System Installation................13 Install Fittings in the SmarTrax Valve ..................14 Install Fittings on the Flow Switch ................... 14 Mount the SmarTrax Valve ...................... 15 Install the Left and Right Steering Hoses ................
  • Page 4 Table of Contents SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...

  • Page 5: Important Safety Information

    • Ensure SmarTrax is disabled prior to starting any maintenance work on SmarTrax or the machine. WARNING • When starting the machine for the first time after installing SmarTrax, be sure that all persons stand clear in case a hose has not been properly tightened.

  • Page 6: Hydraulic Safety

    HAPTER HYDRAULIC SAFETY • Raven Industries recommends that appropriate protective equipment be worn at all times when working on the hydraulic system. • Never attempt to open or work on a hydraulic system with the equipment running. Care should always be taken when opening a system that has been previously pressurized.
  • Page 7 IMPORTANT SAFETY INFORMATION Routing should not allow harnesses to: • Hang below the unit • Have the potential to become damaged due to exposure to the exterior environment. (i.e. tree limbs, debris, attachments) • Be placed in areas of or in contact with machine components which develop temperatures higher than the temperature rating of harness components •...

  • Page 8: Instructions For Hose Routing

    • Tree limbs, brush and debris • Damage where service personnel or operators might step or use as a grab bar • Damage when passing through metal structures SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...
  • Page 9 IMPORTANT SAFETY INFORMATION • High pressure wash Manual No. 016-5032-037 Rev. A...
  • Page 10 HAPTER SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...

  • Page 11: Chapter 2 Introduction

    PREPARING FOR INSTALLATION Before installing the SmarTrax system, park the machine where the ground is level, clean, and dry. Turn off the machine and leave it turned off for the duration of the installation process. Bleed pressure from the hydraulic system by loosening the hydraulic fittings slowly, where applicable.

  • Page 12: Point Of Reference

    Software and manual updates are available on the Raven Applied Technology website: http://www.ravenhelp.com At Raven Industries, we strive to make your experience with our products as rewarding as possible. One way to improve this experience is to provide us with feedback on this manual.

  • Page 13: Kit Contents

    KIT CONTENTS This section contains a list of the components that are included in the SmarTrax kit. Before beginning the SmarTrax installation, compare the items in the kit with the components on this list. If you have questions about the kit, contact your Raven dealer.
  • Page 14 Fitting - -6 SAE O-Ring Plug 333-0012-104 Fitting - -6 ORFS (M) to -8 SAE O-Ring 333-0012-199 (M) Straight Adapter Fitting - -6 ORFS (M) to -10 SAE O-Ring 333-0012-233 (M) Straight Adapter SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...
  • Page 15 INTRODUCTION TABLE 2. Hydraulic Installation Kit (P/N 117-0199-114) Picture Item Description Part Number Qty. Hydraulic Hose - -6 ORFS (F) 90° to -6 214-1000-884 ORFS (F) - 96” Hydraulic Hose - -8 ORFS (F) to -6 ORFS 214-1000-885 (F) - 96” Manual No.
  • Page 16 HAPTER SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...

  • Page 17: Hydraulic System Installation

    Objects or materials that are able to bypass the machine’s hydraulic filtration system will reduce performance and possibly damage the SmarTrax hydraulic valve. Manual No. 016-5032-037 Rev. A...

  • Page 18: Install Fittings In The Smartrax Valve

    INSTALL FITTINGS IN THE SMARTRAX VALVE Before mounting the SmarTrax valve (P/N 334-0003-088) on the machine, install the proper fittings in the valve. This prepares the valve for installation and simplifies the hose connection process later in the procedure. Refer to the figure and table below to install the fittings in the valve.

  • Page 19: Mount The Smartrax Valve

    (P/N 334-003-085). 2. Install the pressure transducers in Ports A1 and B1 of the flow switch. MOUNT THE SMARTRAX VALVE FIGURE 3. New Air Cleaner Hose Mounting Clamp Location 1. Remove the air cleaner hose from the mounting clamp.

  • Page 20: Install The Left And Right Steering Hoses

    5. Using the machine’s bolts, secure the valve mounting bracket (P/N 107-0171-705) to the radar bracket. FIGURE 5. SmarTrax Valve and Flow Switch Installed 6. Install the SmarTrax valve (P/N 334-0008-088) on the valve mounting bracket using four 5/16”-18 x 7/8” hex bolts (P/N 311-0052-104) and four 5/16” split lock washers (P/N 313-1000-019).
  • Page 21 HYDRAULIC SYSTEM INSTALLATION FIGURE 6. Machine’s Left Steering Hose Installed on Flow Switch 2. Route and connect the left steering hose to the fitting installed in Port A2 of the installed flow switch (P/N 334- 0003-085). FIGURE 7. Left Steering Hose Installed 3.
  • Page 22 6. Install the 90° end of the supplied hydraulic hose (P/N 214-1000-884) on the 90° end of the installed tee fitting. 7. Install the straight end of the installed hydraulic hose to the fitting installed in Port A of the SmarTrax valve.

  • Page 23: Install The Pressure Hose

    4. Install the straight end of the supplied hydraulic hose (P/N 214-1000-884) on the 90° end of the installed tee fitting. 5. Connect the 90° end of the installed hydraulic hose to the fitting installed in Port P of the SmarTrax valve. INSTALL THE TANK HOSE FIGURE 10.

  • Page 24: Hydraulic Diagram

    HAPTER HYDRAULIC DIAGRAM SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...
  • Page 25 HYDRAULIC SYSTEM INSTALLATION Manual No. 016-5032-037 Rev. A...
  • Page 26 HAPTER SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...

  • Page 27: Cab Component Installation

    IMPORTANT: Install the washers on the bottom bolts between the wall and the mounting plate to level the node. The mounting plate must be within +/- 2° of level to the wall for the SmarTrax system to operate properly. NOTE: Install the node mounting bracket so that the cable connectors of the node (P/N 063-0173-228) face the operators seat when installed.

  • Page 28: Node Mounting Locations

    HAPTER FIGURE 2. SmarTrax Node Installed 3. Mount the SmarTrax node to the node mounting bracket using three 3/8”-16 zinc flanged lock nuts (P/N 312- 1001-164). NODE MOUNTING LOCATIONS FIGURE 3. Node Mounting Direction Arrows Any two arrows must be parallel...

  • Page 29: Install The Foot Switch

    CAB COMPONENT INSTALLATION INSTALL THE FOOT SWITCH FIGURE 4. Foot Switch Installed 1. Select a suitable location for the foot switch (P/N 063-0172-470) to be installed. NOTE: The foot switch should be installed in a location where the operator has easy access to it and is able to fully press the pedal.
  • Page 30 6. Install the CAN adapter between the machine’s green 12-pin CAN connection. 7. Route and connect the DGPS OUT connector to the console’s DGPS connector. 8. Connect the DGPS connector to the GPS receiver cable. SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...

  • Page 31: Install The Valve Harness

    9. Connect the power leads to the battery studs located behind the operator’s seat. INSTALL THE VALVE HARNESS 1. Connect the VALVE connector of the valve harness cable (P/N 115-4001-111) to the PVE port of the SmarTrax valve (P/N 334-0003-088).
  • Page 32 3. Route the valve harness into the cab through the access panel in the right-rear corner of the cab. 4. Connect the 12-pin connector of the valve harness to the mating connector of the node harness (P/N 115-4001- 135). SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...
  • Page 33 CAB COMPONENT INSTALLATION FIGURE 11. Valve Harness Wiring Diagram Manual No. 016-5032-037 Rev. A...
  • Page 34 HAPTER SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...
  • Page 35 CAB COMPONENT INSTALLATION Manual No. 016-5032-037 Rev. A...
  • Page 36 HAPTER SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...

  • Page 37: Startup Procedures

    5. Access the System Diagnostic screen by selecting the MACHINE TEST option on the Machine Type screen and turn the wheels using the Raven field computer. The machine may need to be rolling forward to cause the wheels to turn left and right.

  • Page 38: Calibrate The Smartrax System

    HAPTER CALIBRATE THE SMARTRAX SYSTEM Refer to the SmarTrax Calibration and Operation Manual (P/N 016-0171-277) for instructions on calibrating the SmarTrax system, adjusting system settings, and system operation. SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...
  • Page 39 Mounting the SmarTrax Node 23 Node Mounting Locations 24 Installing the Valve Harness Hydraulic Installation Hydraulic Diagram Installing Fittings in the SmarTrax Valve Installing Fittings on the Flow Switch Installing the Left and Right Steering Hoses Installing the Pressure Hose Installing the Tank Hose...
  • Page 40 Index SmarTrax, Case IH Patriot 2250, Non-Steer Ready, MY17 and Newer Installation Manual...
  • Page 41 Bring the defective part and proof of purchase to your Raven dealer. If the dealer approves the warranty claim, the dealer will process the claim and send it to Raven Industries for final approval. The freight cost to Raven Industries will be the customer’s responsibility. The Return...
  • Page 42 How Can I Get Service? Bring the defective part and proof of purchase to your Raven dealer. If the dealer approves the warranty claim, the dealer will process the claim and send it to Raven Industries for final approval.

Table of Contents