FIGURE 8. TRANSDUCER Valve Harness Connection
Load Sense
Hose
Assembly
5. Route the TRANSDUCER connector to the steering orbital and connect it to the pressure transducer (P/N 422-
0000-086) installed in the load sense hose assembly as shown in the figure above.
FIGURE 9. WAS Harness Connection
6. Route and connect the WAS connector to the cable of the installed WAS (P/N 063-0181-024).
NOTE:
Secure cable with plastic cable ties.
Cab Component Installation: Install the Valve Harness
CAB COMPONENT INSTALLATION
35