Mounting The Ptx1000 In A Rack - Juniper PTX1000 Hardware Manual

4. Remove the accessory kit and verify the contents against the inventory of components listed in
Table 30 on page 76.
5. Pull out the packing material holding the PTX1000 in place and the PTX1000 chassis.
6. Verify the chassis components received:
Three fan modules
Four power supplies
7. Save the shipping carton and packing materials in case you need to move or ship the chassis later.
Table 30: Inventory of Components Supplied with a PTX1000
Component
Chassis with three fan modules and four power supplies
Rear-mounting blades
Front-mounting rails
RJ-45 cable and RJ-45 to DB-9 adapter

Mounting the PTX1000 in a Rack

IN THIS SECTION
Before You Begin Mounting the PTX1000 | 77
Mounting the PTX1000 | 78
You can mount a PTX1000 in a four post 19-in. rack by using the included mounting brackets.
For four-post rack installation, the shipping carton contains two front-mounting rails with two matching
rear-mounting blades. This configuration allows either end of the PTX1000 to be mounted flush with the
rack and still be adjustable for racks with different depths. The minimum distance the front and rear rack
Quantity
1
2
2
1
76