Ptx1000 Ac Power Cord Specifications - Juniper PTX1000 Hardware Manual

Table 13: PTX1000 AC Power Specifications (continued)
Item
Maximum power consumption

PTX1000 AC Power Cord Specifications

Detachable AC power cords are shipped with the chassis if you include them as part of your order. The
coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The
plug at the male end of the power cord fits into the power source outlet that is standard for your
geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters)
in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and
210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords that can be ordered for
the PTX1000 are in compliance.
Table 14 on page 46 lists AC power cord specifications provided for each country or region.
Specifications
1425 W
45