Port Panel And Management Panel - Juniper PTX1000 Hardware Manual

Port Panel and Management Panel

The port panel of the PTX1000 contains 72 network ports and port LEDs. The management panel of the
PTX1000 contains console and management ports, a reset button, system status LEDs, clocking ports, and
a USB port. Figure 1 on page 19
Figure 1: PTX1000 Port Panel and Management Panel
1 Port panel
—
Each of the 72 network ports on the port panel supports quad small form-factor pluggable plus (QSFP+)
transceivers, and is configured as a channelized 4 x 10-Gigabit Ethernet interface by default (for a maximum
of 288 10-Gigabit Ethernet ports). You can configure each of the 72 ports as a 40-Gigabit Ethernet interface.
You can also configure 24 of the 72 network ports as 100-Gigabit Ethernet interfaces.
describes the maximum number of ports for each interface type supported by the PTX1000.
Table 3: Maximum Supported Ports at Each Interface Speed
Interface Type
10-Gigabit Ethernet
40-Gigabit Ethernet
100-Gigabit Ethernet
NOTE: You can purchase a licensed model of the PTX1000 that allows you to use 18 of the 72
network ports. You can use 18 ports in any combination, for a maximum of 72 10-Gigabit Ethernet
interfaces, 18 40-Gigabit Ethernet interfaces, or 6 100-Gigabit Ethernet interfaces. You can
purchase additional licenses to enable the remaining network ports. Each license enables an
additional 18 of the 72 total network ports.
shows the PTX1000 port panel and management panel.
2
—
Management panel
Maximum Supported Ports
288
72
24
Table 3 on page 19
19