D8 (Dio8/Dtr/Sleep_Request); D9 (Dio9/On_Sleep) - Digi XBee SX 868 User Manual

AT commands
Parameter
1
2
3
4
5
6
7
Default
0x1

D8 (DIO8/DTR/SLEEP_REQUEST)

This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO8/SLEEP_REQUEST configuration (pin 10).
Parameter range
0, 1, 3 - 5
Parameter
0
1
2
3
4
5
Default
1

D9 (DIO9/ON_SLEEP)

This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO9/ON_SLEEP configuration (pin 26).
Parameter range
0, 1, 3 - 6
XBee® SX 868 RF Module User Guide
Description
CTS flow control
N/A
Digital input
Digital output, low
Digital output, high
RS-485 Tx enable, low Tx (0 V on transmit, high when idle)
RS-485 Tx enable high, high Tx (high on transmit, 0 V when idle)
Description
Disabled
Sleep request
N/A
Digital input
Digital output, low
Digital output, high
I/O settings commands
137