AT commands
D8 (DIO8/SLEEP_REQUEST)
Sets or displays the DIO8/SLEEP_REQUEST configuration (pin 9).
This line is also used with Pin Sleep, but pin sleep ignores the D8 configuration. It is always used to
control pin sleep, regardless of configuration of D8.
Parameter range
0, 1, 3 - 5
Parameter Description
0
Disabled
1
N/A
2
N/A
3
Digital input
4
Digital output, low
5
Digital output, high
Default
1
D9 (ON_SLEEP)
Sets or displays the ON/SLEEP configuration (pin 13).
Parameter range
0, 1, 3 - 5
Parameter
0
1
2
3
4
5
Default
1
P0 (DIO10/RSSI/PWM0 Configuration)
Sets or displays the PWM0/RSSI/DIO10 configuration (pin 6).
XBee/XBee-PRO DigiMesh 2.4 RF Module User Guide
Description
Disabled
ON/SLEEP output
N/A
Digital input
Digital output, low
Digital output, high
I/O settings commands
92