Decommissioning And Disposal - Landis+Gyr E230 User Manual

Decommissioning and disposal

9 Decommissioning and disposal


D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual
The procedure for the safe removal of the meter from the installation is
described in 7.4. Please ensure that ALL SAFETY PRECAUTIONS are
met before proceeding.
The components used to manufacture the device can, in the main, be
broken down into constituent parts and sent to an appropriate recycling
or disposal facility. When the product is removed from use, the whole
product must be sent to a professional electronic waste treatment
process. The waste treatment and disposal plants must be approved by
local regulatory authorities.
The end processing of the product and recycling of its components must
always be carried out in accordance with the rules and regulations of the
country where the end processing and recycling are done.
On request, Landis+Gyr will provide more information about the
environmental impact of the product.
This product must not be disposed of in regular waste. Use a
professional electronic waste treatment process.
The following are general guidelines and should NOT take precedence
over local environmental laws and policies, which should be adhered to
without compromise.
Component parts
Printed circuit boards
Metal components
Plastic components
Batteries
Disposal
Delivered to recycling plants
Sorted and delivered to metal recycling
plants
Sorted and delivered to re-granulation if at
all possible
Removed from meter and delivered to
specialised recycling plants
79/84
© Landis+Gyr