Landis+Gyr E230 User Manual page 40

40/84
© Landis+Gyr
Possible states for the +/-P indicators are:
Both off
+P 'on' –P 'off'
-P 'on' +P 'off'
+P 'on' –P flashing
-P 'on' +P flashing
Example C below is the reciprocal of the previous. Active energy is now
zero (circle symbol and no direction indicators (anti-creep mode), but
Reactive energy is now being recorded. Again the arrow and +Q
symbols are flashing.
Also notice that the displayed register is now a positive total kVArh
register.
Example C (OBIS code 3.8.1)
Possible states for the +/-Q indicators are:
Both off
+Q 'on' –Q 'off'
-Q 'on' +Q 'off'
+Q 'on' –Q flashing
-Q 'on' +Q flashing
The Energy Direction Indicators (or anti creep indicators) will always be
displayed. These indicators, along with the phase powered indicators
(L1, L2, L3), battery monitor and rate indicators (see below) provide the
user with a quick overall status of the meter.
D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual
No Active Energy is being consumed.
All energy being consumed is in a positive
direction.
All energy being consumed is in a negative
direction.
Majority of the energy is Positive with some
negative (only in three-phase four-wire circuit;
only with magnitude summation).
Majority of the energy is Negative with some
positive (only in three-phase four-wire circuit;
only with magnitude summation).
No Reactive Energy is being consumed.
All energy being consumed is in a positive
direction.
All energy being consumed is in a negative
direction.
Majority of the energy is Positive with some
negative (only in three-phase four-wire circuit;
only with magnitude summation).
Majority of the energy is Negative with some
positive (only in three-phase four-wire circuit;
only with magnitude summation).
Operation