Faceplate Details - Landis+Gyr E230 User Manual

24/84
4.1.3

Faceplate details

© Landis+Gyr
Figure 6. Terminal layout and phase connections
External Connections
Type Screw terminals
Diameter 9.5 mm (Brass), 8.5 mm (Steel)
Torque Max. 3 Nm
Conductor Cross-section
Maximum with Brass Terminals
Maximum with Steel Terminals
Minimum Conductor Cross-section
Screw Dimensions
Head Diameter
Slot
The meter shows type and metrological markings in accordance with
MID requirements. The Display button (upper front panel green button)
allows the user to scroll through displays as defined in the pre-installed
configuration file. The orange MD button (if fitted) is used to reset the
Maximum Demand feature (if configured), and can be tamper sealed.
The meters serial number and barcode will be laser marked onto the
front of the meter case. Serial numbers are allowed with up to 16
characters.
D000044352 en g – E230 Residential Electricity Meter – ZxR100xC/ZMR100xR – User Manual
Mechanical description
2
35 mm
2
25 mm
2
1.5 mm
M6 x 14
6 mm
1.2 mm