Disposal - Landis+Gyr E650 Series 4 User Manual

90/96
8

Disposal



© Landis+Gyr
Electronic waste treatment
This product must not be disposed of in regular waste. Use a professional
electronic waste treatment process.
The components used to manufacture the device can, in the main, be
broken down into constituent parts and sent to an appropriate recycling or
disposal facility. When the product is removed from use, the whole product
must be sent to a professional electronic waste treatment process. The
waste treatment and disposal plants must be approved by local regulatory
authorities.
The end processing of the product and recycling of its components must
always be carried out in accordance with the rules and regulations of the
country where the end processing and recycling are done.
On request, Landis+Gyr will provide more information about the
environmental impact of the product.
Disposal and environmental protection regulations
The following are general guidelines and should NOT take priority over
local disposal and environmental policies which should be adhered to
without compromise.
Components
Printed circuit boards,
LEDs, LCD display
Metal components
Plastic components
Batteries
D000062026 en a – E650 Series 4 – ZMD400AT/CT, ZFD400AT/CT – User Manual
Disposal
Delivered to recycling plants
Sorted and delivered to metal recycling plants
Sorted and delivered to re-granulation if at all
possible
Removed from meter and delivered to
specialised recycling plants
Disposal